Water Source Piggy Back Float Switch for Sump and Sewage Pumps, WSFSWPB
This wide-angle tethered Water Source WSFSWPB Piggy Back Float Switch for Sump and Sewage Pumps is a replacement switch for sump and sewage pumps. This pump float switch is compatible with various sump pumps. Use of this tethered sump pump float switch is ideal for use in larger diameter pits or basins 18 in. and greater.
- Replacement pump float switch for sump and sewage pumps
- When connecting to a pipe or pump, the float needs 4-in of tether to operate properly; If the float switch is not tethered properly it will not be able to float into an upward position so that the ball bearing inside the switch makes contact to turn the pump on
- In order for the float to operate freely, the basin should be at least 14 inches wide and 16 inches deep; if not, the float could become stuck on the wall of the sump basin
- 8 ft. cord
- Sump pump float switch works with pumps up to 1/2-HP at 120 VAC and 1-HP at 230 VAC
- 115-volt plug attached can be removed for direct wiring
- Brand: Water Source
- Product Weight: 1.49375 lb.
- Product Length: 4 in.
- Warranty: 1-Year Limited
- Application/Use: Piggy Back Float Switch for Sump and Sewage Pumps
- Compatibility: Works with pumps up to 1/2-HP at 120 VAC and 1-HP at 230 VAC
- Country of Origin: Imported
- Finish: Rubber
- Housing Material: Rubber
- Indoor and/or Outdoor: Indoor and Outdoor
- Inlet Diameter: 0 in.
- Material: Rubber
- Maximum Temperature: 104 deg.
- Motor Type: N/A
- Number of Pieces: 1
- Operating Temperature Range: Up to 104 deg
- Outlet Diameter: 0 in.
- Package Height: 5-3/4 in.
- Package Length: 7 in.
- Package Quantity: 1
- Package Weight: 1.3 lb.
- Package Width: 4 in.
- Power Cord Length: 8 ft.
- Power Type: Electric
- Product Height: 2.74 in.
- Product Width: 2.6 in.
- Refillable and/or Exchangeable: No
- Type: Pump Part
- Manufacturer Part Number: WSFSWPB