MasterCool MasterStat Cooler Thermostat, 2.38 in. x 6.25 in. x 8 in. Control Box, 50-90 deg. F Control Range

MasterCool MasterStat Cooler Thermostat, 2.38 in. x 6.25 in. x 8 in. Control Box, 50-90 deg. F Control Range, 110423-2

The MasterCool 110423-2 MasterStat Cooler Thermostat is designed to operate a 2-speed fan motor, a small water pump motor, and an optional water purge pump. for convenient operation, the MasterStat cooler thermostat has a easy to read backlit LCD display. It also features a pre-wet mode to ensure your pads are fully saturated prior to the pump being activated. This MasterCool cooler thermostat is designed to control any ducted evaporative cooler with a 2-speed motor up to 1HP at 120 V or 2HP at 240 V. Easy to install in an outlet box you already have, this simple ducted evaporative cooler thermostat requires minimal wiring.

• Designed to control any ducted evaporative cooler with a 2-speed motor up to 1HP at 120 V or 2HP at 240 V
• The onboard sensor of this cooler thermostat has a control range of 50 to 90 degrees Fahrenheit
• Included outputs feature Auto/Manual, Pump, Fan, and Timer modes for versatile use
• If power is interrupted while unit is operating, the unit will resume in the mode active during power loss
• The MasterStat cooler thermostat is easy to install in an existing outlet box with minimal wiring required
• A rain proof control box is included with the ducted evaporative cooler thermostat for protection
• Pre-wet mode ensures your pads are fully saturated prior to the pump being activated
• Control box dimensions: 2.38 in. D x 6.25 in. W x 8 in. H
• Kit includes: a wall control thermostat, 2-speed control, a wire nut for common earth connection, a small water pump motor, an optional water purge pump, a spare 3.15 Amp fuse for control, and a jumper wire for linking to an N-link
• 1 year limited warranty on the MasterCool cooler thermostat offers assurance